JL Audio C3-650 – 6-1/2″ Convertible Component/Coaxial Speaker System

Description

JL Audio C3-650 – 6-1/2″ Convertible Component/Coaxial Speaker System

With Evolution® C3 convertible component systems, the same product can be deployed in either configuration, delivering exceptional power and audio quality in every application.

Description

The C3-650 system features 6.5-inch (165mm) component woofers with oversized 1.2-inch (30.5mm) voice coils, mineral-filled polypropylene cones, and molded polymer baskets. injection. The woofer design benefits from JL Audio’s vast experience in woofer design and advanced modeling systems.

C3 tweeters are constructed with 1-inch silk dome diaphragms that deliver powerful and extended response, on and off axis. Recessed and surface mount fixtures are included to meet a wide variety of installation needs. They can also be mounted to the woofers in a coaxial format using the included brackets.

C3 crossover arrays are compact and built with premium components including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of presence adjustment in the midrange, for twelve possible voicing combinations!

Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.

Features

• Continuous Power Handling (RMS) 75 W
• Recommended Amplifier Power (RMS) 25 – 150 W / Ch.
• System Efficiency 90.0 dB @ 1 W / 1 m
• System Nominal Impedance 4 Ω
• System Frequency Response 48 Hz – 25 KHz ± 3 dB

Woofer dimensions

• Frame outer diameter 6.50 in / 165 mm
• Grille Tray Outer Diameter 6.74 in / 171 mm
• Motor outer diameter 4.08 in / 104 mm
• Front  Coaxial tweeter front protrusion* 0.75 in / 19 mm
• Front grille projection** 1.03 in / 26 mm
• Mounting hole diameter 5.56 in / 141 mm
• Mounting depth 2.55 in / 65 mm
  * Front coaxial tweeter projection measured from mounting surface
  ** Front grille protrusion measured from mounting surface

Tweeter dimensions

• Flush mount diameter 2.12 in / 54 mm
• Surface mount diameter 1.93 in / 49 mm
• Flush mounting hole diameter 1875 in / 48 mm
• Recessed fixture mounting depth 0.71 in / 18 mm
• Flush mount tweeter
• Front protrusion 0.32 in / 8 mm
• Surface mount tweeter front protrusion 0.95 in / 24 mm

Crossover 

• Width (W) 3,36 po / 85 mm
• Height (H) 1,44 po / 37 mm
• Depth (D) 4,72 po / 120 mm