JL Audio JD500/1 – 500W CLASS D Monoblock Amplifier

Description

JL Audio JD500/1 – 500W CLASS D Monoblock Amplifier

Designed to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD), the JD500/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. Our proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion. The JD500/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier. The JD500/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat.

Features

• Frequency Response: 7Hz – 500Hz (+0, -1dB)
• Signal-to-noise ratio, referred to highest rated power >80 dB below rated power (A-weighted, noise bandwidth 20 Hz to 20 kHz) nominal (A-weighted, noise bandwidth 20 Hz to 20 kHz)
• Signal-to-noise ratio, >60 dB (A-weighted, noise bandwidth 20 Hz – 20 kHz)
• Damping factor @ 4 Ω >1000 / 50 Hz
• Damping factor @ 2 Ω >500 / 50 Hz
• THD+N at rated power <1% at 2 Ω per channel.
• Input voltage range at RCA inputs Switchable from 200 mV – 2 V RMS (low) to 800 mV – 8 V RMS (high)
• Min.Copper Power / Ground Wire Gauge Wire 4 AW
• Fuse rating 50A (AFS or AGU or MaxiFuse)
• Filter Mode(s) Low-Pass only
• Filter Slope(s) 12 dB/octave
• Filter Frequency Range 50 Hz – 500 Hz
• Detented, Calibrated Filter Freq. Potentiometer No
• Filter Defeat Function No
• Infrasonic Filter No
• Bass Boost EQ Yes
• Output Polarity Switch No
• Remote Subwoofer Level Control Optional (RBC-1)
• Remote Bass EQ Boost Control No
• Pass-Through Preamp Output Buffered

Rated continuous power (RMS) at 14.4 V

• @ 4 Ω 250 W RMS x 1
• @ 3 Ω 350 W RMS x 1
• @ 2 Ω 500 W RMS x 1
• @ 1.5 Ω N/A

Rated continuous power (RMS) at 12.5 V

• @ 4 Ω 225 W RMS x 1
• @ 3 Ω 300 W RMS x 1
• @ 2 Ω 400 W RMS x 1
• @ 1.5 Ω N/A

Dimensions

• Height (H) 2.10 in / 53 mm
• Width (L) 9.50 in / 242 mm
• Depth (D) 7.50 in / 190 mm