Description
JL Audio JX1000/1D – Monoblock Class D Subwoofer Amplifier
This amazingly compact amplifiers delivers a real kilowatt of power at an unbelievably great price. Using a tough-as-nails Class D circuit with a robust MOSFET power supply, the JX1000/1D is fully capable of driving the toughest subwoofer loads with very good control and excellent sound quality.
Targeted specifically for subwoofer applications, the JX1000/1D includes a low-pass filter with continuously variable cutoff frequency selection from 50-200 Hz. It also features a variable bass boost at 45 Hz. with up to 12 dB of boost and an optional remote level control. Dedicated hi-level inputs are included, in addition to conventional low-level RCA inputs, making it easy to integrate with a variety of OEM and aftermarket head units.
Rated Continuous (RMS) Power @ 14.4 V
500 W RMS @ 4 ohm
750 W RMS @ 3 ohm
1000 W RMS @ 2 ohm
General Specifications
Frequency Response : 20 Hz – 150 Hz (+0, -1dB)
S/N Ratio, referred to highest rated power :>75 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W :>45 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
Damping Factor @ 4 Ω :>1000 / 50 Hz
Damping Factor @ 2 Ω :>500 / 50 Hz
THD+N @ Rated Power :<1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs :200 mV – 4 V RMS
Input Voltage Range @ High-Level Inputs :2 V – 10 V RMS
Min.Copper Power / Ground Wire Gauge :4 AWG wire
Fuse Rating :80 A (AFS, AGU or MaxiFuse™)
Signal Processing
Filter Mode :Low-Pass only
Filter Slope :12 dB/octave
Filter Frequency Range :50 Hz – 200 Hz
Detented, Calibrated Filter Freq. Potentiometer :No
Filter Defeat Function :No
Infrasonic Filter :none
Bass Boost EQ :0 to +12 dB @ 45 Hz
Output Polarity Switch :No
Remote Subwoofer Level Control :Optional (RBC-1)
Remote Bass EQ Boost Control :No
Pass-Through Preamp Output : Unbuffered
Physical Specifications
Height : 2.09 in / 53 mm
Width : 10,94 in / 278 mm
Depth : 7.68 in / 195 mm
Net Weight : 7 lb / 3.17 kg
Reviews
There are no reviews yet.