JL Audio 10W6V3-D4 – 10″ Subwoofer Driver

JL Audio 10W6V3-D4 – 10″ Subwoofer Driver

Please note that free delivery is not available for this item.

If you are seeking to reproduce the highest quality sub-bass in a very compact enclosure application, the 10W6v3-D4 is the ultimate choice.

Description

This advanced Subwoofer offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance. The 10W6v3 is best used with amplifier power in the 200W – 600W range and is optimized to operate in a sealed enclosure with only 0.55 cu. ft. (15.6 l) of air space, or a 0.75 cu. ft. (21.2 l) ported enclosure. Detailed enclosure recommendations can be found in the “Specifications” tab. Greater excursion capability and higher power handling distinguish it from our 10W3v3 10-inch Subwoofer, allowing for higher output. Dual 4 Ω voice coils permit deploying the W6v3 as a 2 Ω or 8 Ω driver.

Features

• Continuous Power Handling (RMS) 600W
• Recommended amplifier power (RMS) 200 – 600 W
• Nominal impedance (Znom) Double 4 Ω
• Free air resonance (Fa) 30.12 Hz
• Electrical “Q” (Qes) 0.543
• Mechanical “Q” (Qms) 9.228
• Speaker Total “Q” (Qts) 0.513
• Equivalent compliance (Vas) 0.821 ft3 / 23.25 L
• Unidirectional linear excursion (Xmax)* 0.75 in / 19 mm
• Reference efficiency (no) 0.11%
• Efficiency (1W/1m)** 82.7dB SPL
• Piston effective area (Sd) 49.303 square inches / 0.0318 m²
• DC resistance (Re)*** 6452 Ω * Xmax specifications are derived via the one-way voice coil overshoot method without applying correction factors. ** For voice coils wired in parallel, divide “Re” by 4. All other specifications remain the same. *** Re (DC resistance) is measured with the voice coils in series, for parallel wired specifications divide Re by 4. All other specifications remain the same.

Dimensions

• Nominal diameter 10.0 in / 250 mm
• Overall Diameter (A) 10.5 in / 267 mm
• Mounting hole diameter (B) 9.02 in / 229 mm
• Bolt Hole Circle Diameter (C) 9.86 in / 250 mm
• Motor Outer Diameter (D) 6.76 in / 172 mm
• Mounting Depth (E) 6.89 in / 175 mm
• Clearance required for post vent 0.50 in / 13 mm
• Rider Displacement 0.078 cu. ft. / 2.1 L Net
• Weight 20 lbs / 9.1 kg

Sealed Enclosure Specifications ( not included)

• Wall Thickness 0.75 in / 19 mm
• Front Baffle Thickness 0.75 in / 19 mm
• Volume (net int.) 0.55 cu ft / 15.57 L
• External Width (W) 12.5 in / 318 mm
• External Height (H) 12.5 in / 318 mm
• External Depth (D) 10.5 in / 267 mm
• F3 42.27 Hz
• Fc 47.55 Hz
• Qtc 0.8099

Ported Enclosure Specifications

• Wall Thickness 0.75 in / 19 mm
• Front Baffle Thickness 0.75 in / 19 mm
• Volume (net int.) 0.75 cu ft / 21.2 L
• External Width (W) 21.5 in / 546 mm
• External Height (H) 12.375 in / 314 mm
• External Depth (D) 11.125 in / 282 mm
• Internal Slot Port Width (SW) 1.375 in / 35 mm
• Internal Slot Port Height (SH) 10.875 in / 275 mm
• Internal Slot Port Length (SL) 30.40 in / 772 mm
• Port Extension Length (EL) 16.5 in / 419 mm
• Tuning Frequency (Fb) 39 Hz
• F3 33 Hz