JL Audio JD1000/1 – 1000W CLASS D Monoblock Amplifier

JL Audio JD1000/1 – 1000W CLASS D Monoblock Amplifier

Description

Designed to output 1000 watts into 2 ohms (14.4V, 1% THD), the JD1000/1 amplifier is an excellent solution for powering subwoofers in a cost-conscious system.

The JD1000/1 controls are located on the entry panel. while power and speaker connections are along the opposite end of its extruded aluminum chassis. Signal processing features include a 12dB/octave low-pass filter, with continuously variable frequency selection from 50-500Hz, and a variable bass boost EQ. Dual-range differential balanced inputs are also available, capable of accepting both line-level and speaker-level signals. Auto-on capability (via signal detection or DC offset detection) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.

The JD1000/1 also features an integrated LED clip indicator ring, surrounding the input sensitivity control. This useful feature allows you to adjust your amplifier’s input sensitivity quickly and accurately without special equipment. With the addition of an RBC-1 Level Remote (sold separately), you can control the subwoofer level from the driver’s seat.

Features

• Frequency response 7Hz – 500Hz (+0, -1dB)
• Signal-to-noise ratio, referred to highest rated power > 80 dB below rated power (A-weighted, noise bandwidth 20 Hz to 20 kHz)
• Signal-to-noise ratio, referred to 1 W > 50 dB (A-weighted, noise bandwidth 20 Hz – 20 kHz)
• Damping factor @ 4 Ω >1000 / 50 Hz
• Damping factor @ 2 Ω >500 / 50 Hz THD+N at nominal power <1% at 2 Ω per channel.
• Input voltage range at RCA inputs
• Switchable from 200 mV – 2 V RMS (low) to 800 mV – 8 V ​​RMS (high)
• Min.Copper Power / Ground Wire Gauge Wire 4 AWG
• Fuse rating 80 A (AFS, AGU or MaxiFuse™)

Rated continuous power (RMS) at 14.4 V @

• 4Ω 600W RMS x 1
• @ 3Ω 800W RMS x 1
• @ 2Ω 1000W RMS x 1
• @ 1.5Ω N/A

Rated continuous power (RMS) at 12.5 V

• @ 4Ω 500W RMS x 1
• @ 3Ω 650W RMS x 1
• @ 2Ω 800W RMS x 1
• @ 1.5Ω N/A

Dimensions 

• Height  (H) 2.10 in / 53 mm
• Width (L) 11.40 in / 290 mm
• Depth (D) 7.50 in / 190 mm