JL Audio MX280/4 – 4 Channel Class D 280W Amplifier

Description

JL Audio MX280/4 – 4 Channel Class D 280W Amplifier

Engineered specifically for powersports applications, the 4-channel MX280/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.

Generating a solid 50W x 4 into 4 ohms (14.4V, 1% THD), the MX280/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 140W x 2 into 4 ohms.

Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.

Features

• Frequency Response 20 Hz – 20 kHz (+0, -1dB)
• S/N Ratio, referred to highest rated power >89.5 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth)
• S/N Ratio, referred to 1 W >68 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
• Damping Factor @ 4 Ω >60 / 50 Hz
• Damping Factor @ 2 Ω >30 / 50 Hz
• THD+N @ Rated Power <1% @ 2 Ω per Ch.
• Input Voltage Range @ RCA Inputs Switchable from 250 mV – 4 V RMS (Low) to 750 mV – 15 V RMS (High)
• Min.Copper Power / Ground Wire Gauge 8 AWG wire
• Fuse Rating 35 A (AFS, AGU or MaxiFuse™)

Rated Continuous (RMS) Power @ 14.4 V

• @ 4 Ω 50 W RMS x 4
• @2 Ω 70 W RMS x 4
• Bridged @ 140 W RMS x 2

Rated Continuous (RMS) Power @ 12.5 V

• @ 4 Ω 36 W RMS x 4
• @ 2 Ω 52 W RMS x 4
• Bridged @ 100 W RMS x 2

Physical Specifications

• Height (H) 1.77 in / 45 mm
• Width (W) 8.66 in / 220 mm
• Depth (D) 3.09 in / 78.5 mm
• Net Weight 3.18 lb / 1.44 kg