JL Audio RD1000/1 – 1000W CLASS D Monoblock Amplifier

JL Audio RD1000/1 – 1000W CLASS D Monoblock Amplifier

Please note that free delivery is not available for this item.

At the heart of this ultra-sleek and compact powerhouse is JL Audio’s exclusive NexD™ Class D technology, enabling high power output with exceptional efficiency and low distortion.

Description

Specifically designed for subwoofer applications, the RD1000/1 monoblock amplifier delivers 1000 watts of jaw-dropping bass output into 2 ohms (14.4V, 1% THD).

For your convenience, all controls of the RD1000/1 are located on top of the amplifier, under a protective cover, with all connections located along one side of its chassis.

Signal processing features include a 12dB/octave low-pass filter, with continuously variable frequency selection from 50-500Hz, and a variable bass boost EQ.

Dual-range and differentially balanced inputs are also onboard, capable of accepting most input voltage levels. Auto-on capability (via signal detection or DC offset detection) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.

The RD1000/1 is also equipped with an integrated LED clip indicator. This brand new innovative feature allows you to easily adjust your amplifier’s input sensitivity setting quickly and accurately without special equipment. The RD1000/1 features a durable black powder coated finish and a top mounted bi-color LED light strip that signals status and overall status.

Controlling the subwoofer level from the driver’s seat is easy with the addition of the optional RBC-1 Remote Level Control (sold separately).

Features

• Frequency response 7Hz – 500Hz (+0, -1dB)
• Signal-to-noise ratio, referred to highest rated power > 80 dB below rated power (A-weighted, noise bandwidth 20 Hz to 20 kHz)
• Signal-to-noise ratio, referred to 1 W > 50 dB (A-weighted, noise bandwidth 20 Hz – 20 kHz)
• Damping factor @ 4 Ω >1000 / 50 Hz
• Damping factor @ 2 Ω >500 / 50 Hz THD+N at nominal power <1% at 2 Ω per channel.
• /Input voltage range at RCA inputs
• Switchable from 200 mV – 2 V RMS (low) to 800 mV – 8 V ​​RMS (high)
• Min.Copper Power / Ground Wire Gauge Wire 4 AWG
• Fuse rating 80 A (AFS, AGU or MaxiFuse™)

Rated continuous power (RMS) at 14.4 V

• @ 4 Ω 600 W RMS x 1
• @ 3 Ω 800 W RMS x 1
• @ 2 Ω 1000 W RMS x 1
• @ 1.5 Ω N/A

Rated continuous power (RMS) at 12.5 V

• @ 4 Ω 500 W RMS x 1
• @ 3 Ω 650 W RMS x 1
• @ 2 Ω 800 W RMS x 1
• @ 1.5 Ω N/D
•  

Dimensions

• Hauteur (H) 2,13 po / 54 mm
• Largeur (L) 14.66 in / 372 mm
• Profondeur (D) 6,96 po / 177 mm